PT Cruiser - Boost Control & Electronics

Call 937-561-8661 for Sales and Service

Manual Boost Controllers


MBC1
MBC-2A
 

The  kit includes all items needed for installation EXCEPT a  BOOST GAUGE
1. The simplest controller - lightweight aluminum body
2. Black Knurled Thumb Screw sets boost - notched face for reference - no tools required to set
3. Knurled Thumb Locknut - no tools required to lock
4. Easier adjustment - approx 2psi per 1/4turn means easier fine tuning and resetting.
5. Brass fittings with multiple barbs
6. Universal mounting bracket, hoses, 'T' fitting, plugs & ties are included.
 ** Install PDF**
MBC-1 - $59.95

Lo-Hi Dual Controller
Switch between stock boost and your set boost (for other drivers, low traction conditions, etc). Mount the toggle switch in the driver's compartment to activate a solenoid in the engine bay which switches between the two boost pressures or our "Wide Open Throttle" switch (see Stage 2)
 **Install PDF**.
MBC-2A - $99.95


 

Voltage Clamp


 

The VC1 (Voltage Clamp) is designed to condition the output of voltage based air flow meters and MAP sensors.  Under normal operating conditions, the VC1 outputs a signal that is identical to the flow signal present at its input.  When the voltage of the flow signal or MAP sensor reaches the internally set clamp level, the VC1 maintains a constant output voltage at clamp level as the input voltage rises.
 ** Install PDF**  
SS-VC2 - $85